Skip to content

Mechanical Engineering Technician

Credential: DiplomaProgram Code: 30601Length: 4 semestersProgram Starting Between:  

Admission Requirements

Applicants must meet all the requirements below in order to meet minimum program eligibility. Meeting minimum eligibility requirements does not guarantee an offer of admission. Admission decisions will be available via MyHumber, or by email and mail. Admission decisions will not be released by phone.

Admission selection is based on the following 3 requirements:

  • Academic

    To be eligible for admission, you must possess the following:

    • Ontario Secondary School Diploma (OSSD) or equivalent including these required courses:
      • Grade 12 English (ENG4C or ENG4U or equivalent)
      • Grade 12 Mathematics (MCT4C, MDM4U, MCB4U, MGA4U, MCV4U or MHF4U - MAP4C is acceptable at 81 per cent or higher) or equivalent
      • Two Grade 11 or Grade 12 C, M or U courses in addition to those listed above

    or

    or

    Mature Applicants

    Diplomas and Certificates

    An applicant is considered a mature applicant if they have not completed secondary school or other postsecondary school, and will be 19 or older as of the first day of classes. Humber will invite you for testing to demonstrate that you meet program eligibility.

    Degrees

    An applicant is considered a mature applicant if they have not completed secondary school or attended postsecondary studies, and will be 21 or older as of the first day of classes. Mature applicants for degree programs will be required to meet course requirements at the U/M level or equivalent.

    College Transfer Applicants

    Diplomas and Certificates

    An applicant is considered a college transfer applicant if they have completed some or all of a college-level credential. Humber may use a combination of secondary school and/or college courses and grades to determine program eligibility.

    Degrees

    An applicant is considered a college transfer applicant if they have completed some or all of a college-level credential. Humber may use a combination of secondary school and/or college courses and grades to determine program eligibility. Applicants must have an overall minimum grade point average (GPA) of 65 per cent in the program. Applicants are required to disclose and provide academic transcripts for all course work completed at the postsecondary level.

    University Transfer Applicants

    Diplomas and Certificates

    An applicant is considered a university transfer applicant if they have completed some or all of a university-level credential. Humber may use a combination of secondary school and/or university courses and grades to determine program eligibility.

    Degrees

    An applicant is considered a university transfer applicant if they have completed some or all of a university-level credential. Humber may use a combination of secondary school and/or university courses and grades to determine program eligibility. Applicants are required to disclose and provide academic transcripts for all course work completed at the postsecondary level.

  • English Language Proficiency

    All applicants whose first language is not English must meet Humber’s English Language Proficiency Policy.

  • International Credit Evaluation

    Canadian citizens or permanent residents with international education are required to provide a WES or ICAS evaluation.

INTERNATIONAL ACADEMIC EQUIVALENCY

Admission equivalencies for Humber depend on your country of study. Please enter your location or choose detect my location to see the requirements for your country below.

Post-Admission Requirements

Once you have been accepted, and have confirmed your offer, you may need to complete a further set of requirements related to your program (Post-Admission Requirements).

Not available

Fees

The 2019-2020 fee for two semesters was:

  • domestic: $3,839.50
  • international: $15,412.00

Fees are subject to change.

Scholarships

Humber offers a variety of scholarships each year.

Learn more

Fees by Semester 

Fees by Semester

Semester 1 Domestic Fee International Fee*
Total $1,962.25 $7,496.00
Tuition $1,351.41 $6,885.16
Compulsory Ancillary Fee $469.89 $469.89
Enhanced Student Experience Fee (Optional) $55.95 $55.95
Program Ancillary Fee $85.00 $85.00
Co-op/Placement $0.00 $0.00

 

Semester 2 Domestic Fee International Fee*
Total $1,877.25 $7,496.00
Tuition $1,351.41 $6,970.16
Compulsory Ancillary Fee $469.89 $469.89
Enhanced Student Experience Fee (Optional) $55.95 $55.95
Program Ancillary Fee $0.00 $0.00
Co-op/Placement $0.00 $0.00

 

Semester 3 Domestic Fee International Fee*
Total $1,877.25 $7,496.00
Tuition $1,351.41 $6,970.16
Compulsory Ancillary Fee $469.89 $469.89
Enhanced Student Experience Fee (Optional) $55.95 $55.95
Program Ancillary Fee $0.00 $0.00
Co-op/Placement $0.00 $0.00

 

Semester 4 Domestic Fee International Fee*
Total $1,877.25 $7,496.00
Tuition $1,351.41 $6,970.16
Compulsory Ancillary Fee $469.89 $469.89
Enhanced Student Experience Fee (Optional) $55.95 $55.95
Program Ancillary Fee $0.00 $0.00
Co-op/Placement $0.00 $0.00

*Plus Mandatory Health Insurance fee once per academic year: Fall start - $420 Winter start - $280 Summer start - $140

Pathways

Pathways are academic routes that students can take to move from one credential to another.

PATHWAYS OUT TO ANOTHER PROGRAM:

WITHIN HUMBER

View Advanced Diploma 

Upon completion of this program, graduates may pursue a Mechanical Engineering Technology diploma by taking the third year of this program.

TO A PARTNER INSTITUTION

Bachelor of Science, Industrial Technology

Graduates of Humber's Mechanical Engineering Technician diploma program are invited to apply to continue their studies at the State University of New York - Buffalo State College. Graduates must have a minimum overall GPA of 2.0 with a background in Technical Science or Mathematics to be considered for advanced standing in the Bachelor of Science, Industrial Technology program. Humber graduates will be given the opportunity to complete all program requirements in approximately four semesters of full-time study (15 credit hours per semester).

For more information, please contact:

admissions@buffalostate.edu

Bachelor of Science, Mechanical Engineering Technology

Graduates of Humber;s Mechanical Engineering Technician diploma program are invited to apply to continue their studies at the State University of New York - Buffalo State College. Graduates must have a minimum overall GPA of 2.0 to be considered for advanced standing in the BSc, Mechanical Engineering Technology program. Humber graduates will be given the opportunity to complete all program requirements in approximately four semesters of full-time study (15 credit hours per semester).

For more information, please contact:

admissions@buffalostate.edu

Law LLB

Humber students who have successfully completed a Diploma in any field at Humber College and meet the requirements, will be considered for admission into the University of Gloucestershire's Law LLB (Hons) (2-year fast track). International students should demonstrate and must provide evidence that they have attained a level of English Equivalent to IELTS 6.0 overall. Alternative acceptable English Language qualifications can be found at: http://www.glos.ac.uk/study/international/Pages/international-students.aspx

Admission to the academic programs listed is at the sole discretion of the partner post-secondary institution. Please contact the institution for detailed admission requirements

Business Bachelor of Business Administration

Students who complete a 2 year diploma at Humber will be granted 60 credit hours toward the completion of a bachelor degree program at Davenport University. You will need to complete a minimum of 60 credit hours (approximately two years of full-time attendance) to meet residency and program requirements and to complete your bachelor degree program. Students must complete a minimum total of 120 semester credit hours to earn a bachelor degree. The total credit hours will include the completed 2 year diploma classes plus any courses completed through Davenport University.

Admission to the academic programs listed is at the sole discretion of the partner post-secondary institution. Please contact the institution for detailed admission requirements.

Bachelor of Technology

Graduates of Humber's Mechanical Engineering Technician Diploma may transfer into Thompson Rivers University's online degree programs: 

Students applying for admission to any of the University programs are required to submit the university application form and applicable fees.  Students are subject to all University admission policies including the requirement to provide original documentation showing their full postsecondary academic history along with graduation with a relevant diploma from Humber.

For more information, contact: student@tru.ca 

Admission to the academic programs listed is at the sole discretion of the partner post-secondary institution. Please contact the institution for detailed admission requirements.

Bachelor of Technology - Trades and Technology Leadership

Graduates of Humber's Mechanical Engineering Technician Diploma may transfer into Thompson Rivers University's online degree programs: 

Students applying for admission to any of the University programs are required to submit the university application form and applicable fees.  Students are subject to all University admission policies including the requirement to provide original documentation showing their full postsecondary academic history along with graduation with a relevant diploma from Humber.

For more information, contact: student@tru.ca 

Admission to the academic programs listed is at the sole discretion of the partner post-secondary institution. Please contact the institution for detailed admission requirements.

Bachelor of Applied Management

Graduates of any two-year diploma program at Humber Institute of Technology & Advanced Learning, who have attained a cumulative grade point average of 70% or greater will be eligible to enter year three of the four-year Bachelor of Applied Management (BAM) at the University of New Brunswick, Saint John. 

Depending on the diploma program, students may be exempted from study in certain courses and therefore, requested to take alternate courses offered by the Faculty of Business. 

For more information please contact: admissions@unb.ca.

Please note:  Admission to the academic programs listed is at the sole discretion of the partner post-secondary institution. Please contact the institution for detailed admission requirements.

Contact Us

Program Specific Questions

Sherif Hanna, program co-ordinator 
416.675.6622 ext. 4713
sherif.hanna@humber.ca

Current students please send inquiries to: SATadvising@humber.ca.

Admissions Questions

Domestic Students  

Phone: 416-675-5000
Email: enquiry@humber.ca

International Students  

Contact the International Centre

How to Apply

Applications to Humber are made through ontariocolleges.ca. Be sure to submit your application by the equal consideration deadline of February 1. You may apply after February 1, however, post-February 1 applications will be considered on a first-come, first-served basis depending on the availability of the space in the program. To check program availability refer to the Campus/Availability listing on Humber's program pages or ontariocolleges.ca.

Admissions Road Map

Apply through Ontario Colleges

INTERNATIONAL STUDENTS

If you’re an international student, you can apply directly to Humber via our International Centre.

Apply through the International Centre

close widget icon

Humber’s Mechanical Engineering Technician diploma program provides you with the necessary skills to design and manufacture mechanical systems and subsystems. You will learn the design concepts with the most advanced software and work with the most updated technologies in advance manufacturing. The curriculum covers the theory and the skills required for:

  • engineering design and modelling
  • using solid works and AutoCAD
  • mechanical components and systems design
  • advanced manufacturing technologies
  • programming (CNC) machine tools using computer-aided manufacturing (CAM) software

The curriculum includes courses in solid mechanics, mechanical design, hydraulics, pneumatics, programmable logic controllers (PLCs), maintenance techniques and manufacturing. You will be able to develop and implement manufacturing procedures to produce and manufacture system's designs.

Courses Program Standards

Upon successful completion of the program, a graduate will:

  • Complete all work in compliance with current legislation, standards, regulations and guidelines.
  • Apply quality control and quality assurance procedures to meet organizational standards and requirements.
  • Comply with current health and safety legislation, as well as organizational practices and procedures.
  • Apply sustainability* best practices in workplaces.
  • Use current and emerging technologies* to support the implementation of mechanical engineering projects.
  • Analyze and solve mechanical problems by applying mathematics and fundamentals of mechanical engineering.
  • Interpret, prepare and modify mechanical engineering drawings and other related technical documents.
  • Contribute to the design and the analysis of mechanical components, processes and systems applying fundamentals of mechanical engineering.
  • Manufacture, assemble, maintain and repair mechanical components according to required specifications.
  • Verify the specifications of materials, processes and operations to support the design and production of mechanical components.
  • Contribute to the planning, implementation and evaluation of projects.
  • Develop strategies for ongoing personal and professional development to enhance work performance.


Close

The Humber Experience

FIRST competition

Humber Hosts FIRST Robotics Competition

In partnership with FIRST Robotics Canada
March 8 to 10, 2019

Combining the excitement of sport with the rigors of science and technology, the FIRSTRobotics Competition is the ultimate sport for the mind.

Humber Hosts Summer Exchange Program from Parul University

Humber College was thrilled to welcome 9 international students from India’s Parul University on June 22 as part of the summer exchange program between both institutions.

Your Career

Begin a career designing and manufacturing with our Mechanical Engineering Technician diploma.

According to the Canadian Government’s Working in Canada website, the outlook for jobs in this field is positive. “Due to a concentration of employers such as power plants, large automotive manufacturers and other transportation and goods manufacturers, openings for mechanical engineers should remain steady,” says the report. 

Graduates find employment in areas related to mechanical design, manufacturing, testing, consulting and service industries, as well as in machine tool sales and service departments. Demand is growing for graduates in fields related to the sustainable economy and in consulting engineering particularly for companies engaged in infrastructure projects.

Program Availability

START DATE LOCATION STATUS INTERNATIONAL STATUS
January 2020 North Open Closed
September 2020 North Open Open
January 2021 North Open Open

Mechanical Engineering Technology Program

mechanical equipment sitting on a table

Watch the video to see how this program covers the theory and the skills students need to render engineering drawings using the latest in 2D and 3D computer-aided drafting software.


Humber

Advanced Manufacturing Capstone

Advanced Manufacturing Capstone

Wed, July 17, 2019

The Advanced Manufacturing Cluster completed various capstone projects across its four programs in the 2018/2019 academic year

Read the Full Story

No news at this time.

Faculty of Applied Sciences & Technology Events

Fall Reading Week

Fall Reading Week

Humber

Mon, October 21, 2019
All Campuses

October 21 - 25

No Classes, College Open

Read More

Faculty of Applied Sciences & Technology News

Student Work Showcases

Student Work Showcases

Wed, August 21, 2019

The Industrial Design Thesis Project is a 2-semester final year project which is the Capstone project for all Industrial Design degree aspirants.

Read More

No news at this time.

Every attempt is made to ensure that information contained on this website is current and accurate. Humber reserves the right to correct any error or omission, modify or cancel any course, program, fee, timetable or campus location at any time without prior notice or liability to users or any other Person.

On June 29, 2018, the Provincial Government of Ontario announced the renaming of the Ministry of Advanced Education and Skills Development (MAESD) to the Ministry of Training, Colleges and Universities (MTCU). Both names may appear on this website.