Skip to content

Electrical Engineering Technician - Control Systems

Credential: DiplomaProgram Code: 30111Length: 4 semestersProgram Starting Between:  

Admission Requirements

Applicants must meet all the requirements below in order to meet minimum program eligibility. Meeting minimum eligibility requirements does not guarantee an offer of admission. Admission decisions will be available via MyHumber, or by email and mail. Admission decisions will not be released by phone.

Admission selection is based on the following 3 requirements:

  • Academic

    To be eligible for admission, you must possess the following:

    • Ontario Secondary School Diploma (OSSD) or equivalent including these required courses:
      • Grade 12 English (ENG4C or ENG4U or equivalent)
      • Grade 12 Mathematics (MAP4C, MCT4C, MDM4U, MCB4U, MGA4U, MCV4U or MHF4U or equivalent)
      • Two Grade 11 or Grade 12 C, M or U courses in addition to those listed above

    or

    or

    Mature Applicants

    Diplomas and Certificates

    An applicant is considered a mature applicant if they have not completed secondary school or other postsecondary school, and will be 19 or older as of the first day of classes. Humber will invite you for testing to demonstrate that you meet program eligibility.

    Degrees

    An applicant is considered a mature applicant if they have not completed secondary school or attended postsecondary studies, and will be 21 or older as of the first day of classes. Mature applicants for degree programs will be required to meet course requirements at the U/M level or equivalent.

    College Transfer Applicants

    Diplomas and Certificates

    An applicant is considered a college transfer applicant if they have completed some or all of a college-level credential. Humber may use a combination of secondary school and/or college courses and grades to determine program eligibility.

    Degrees

    An applicant is considered a college transfer applicant if they have completed some or all of a college-level credential. Humber may use a combination of secondary school and/or college courses and grades to determine program eligibility. Applicants must have an overall minimum grade point average (GPA) of 65 per cent in the program. Applicants are required to disclose and provide academic transcripts for all course work completed at the postsecondary level.

    University Transfer Applicants

    Diplomas and Certificates

    An applicant is considered a university transfer applicant if they have completed some or all of a university-level credential. Humber may use a combination of secondary school and/or university courses and grades to determine program eligibility.

    Degrees

    An applicant is considered a university transfer applicant if they have completed some or all of a university-level credential. Humber may use a combination of secondary school and/or university courses and grades to determine program eligibility. Applicants are required to disclose and provide academic transcripts for all course work completed at the postsecondary level.

  • English Language Proficiency

    All applicants whose first language is not English must meet Humber’s English Language Proficiency Policy.

  • International Credit Evaluation

    Canadian citizens or permanent residents with international education are required to provide a WES or ICAS evaluation.

INTERNATIONAL ACADEMIC EQUIVALENCY

Admission equivalencies for Humber depend on your country of study. Please enter your location or choose detect my location to see the requirements for your country below.

Post-Admission Requirements

Once you have been accepted, and have confirmed your offer, you may need to complete a further set of requirements related to your program (Post-Admission Requirements).

Not available

Fees

The 2018-2019 fee for two semesters was:

  • domestic: $3,937.70
  • international: $14,964.00

Fees are subject to change.

Scholarships

Humber offers a variety of scholarships each year.

Learn more >

Fees by Semester 

Fees by Semester

Semester 1Domestic FeeInternational Fee*
Total$1,976.35$7,272.00
Tuition$1,501.57$6,797.22
Mandatory Non-Tuition$459.78$459.78
Lab/Materials$15.00$15.00
Co-op/Placement$0.00$0.00

 

Semester 2Domestic FeeInternational Fee*
Total$1,961.35$7,272.00
Tuition$1,501.57$6,812.22
Mandatory Non-Tuition$459.78$459.78
Lab/Materials$0.00$0.00
Co-op/Placement$0.00$0.00

 

Semester 3Domestic FeeInternational Fee*
Total$1,961.35$7,272.00
Tuition$1,501.57$6,812.22
Mandatory Non-Tuition$459.78$459.78
Lab/Materials$0.00$0.00
Co-op/Placement$0.00$0.00

 

Semester 4Domestic FeeInternational Fee*
Total$1,961.35$7,272.00
Tuition$1,501.57$6,812.22
Mandatory Non-Tuition$459.78$459.78
Lab/Materials$0.00$0.00
Co-op/Placement$0.00$0.00

*Plus Mandatory Health Insurance fee once per academic year: Fall start - $420 Winter start - $280 Summer start - $140

Additional Costs

Students must purchase Electronics Work Bench software, lab kit and a digital multimeter.

Pathways

Pathways are academic routes that students can take to move from one credential to another.

PATHWAYS WITHIN HUMBER AFTER THIS PROGRAM

Upon completion of this program, graduates may pursue an Electrical Engineering Technology – Control Systems diploma by taking the third year of the program. 

Graduates are eligible for registration in the Ontario Association of Engineering Technicians and Technologists (OACETT) upon successful completion of the engineering technology program. Graduates of the technology program may be qualified to work anywhere in Canada and in several countries around the world.

PATHWAYS OUT TO A PARTNER INSTITUTION

Programs:

  • Bachelor of Technology
  • Bachelor of Technology - Trades and Technology Leadership

The following Humber programs will articulate with specific transfer credits into the Bachelor of Technology or the Bachelor of Technology - Trades and Technology Leadership programs at Thompson Rivers University:

  • Architectural Technology Advanced Diploma program is granted a maximum of 69 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Architectural Technology Advanced Diploma program is granted a maximum of 63 transfer credits into the Bachelor of Technology program.
  • Civil Engineering Technology Advanced Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
  • Computer and Network Support Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Computer and Network Support Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
  • Computer Engineering Technology Advanced Diploma program is granted a maximum of 66 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Computer Engineering Technology Advanced Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
  • Electrical Engineering Technician - Control Systems Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Electrical Engineering Technician - Control Systems Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
  • Electrical Engineering Technology - Control Systems Advanced Diploma program is granted a maximum of 66 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Electrical Engineering Technology - Control Systems Advanced Diploma program is granted a maximum of 63 transfer credits into the Bachelor of Technology program.
  • Electromechanical Engineering Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Electromechanical Engineering Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
  • Electromechanical Engineering Technology Advanced Diploma program is granted a maximum of 69 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Electromechanical Engineering Technology Advanced Diploma program is granted a maximum of 63 transfer credits into the Bachelor of Technology program.
  • Electronics Engineering Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Electronics Engineering Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
  • Electronics Engineering Technology Advanced Diploma program is granted a maximum of 69 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Electronics Engineering Technology Advanced Diploma program is granted a maximum of 63 transfer credits into the Bachelor of Technology program.
  • Heating, Refrigeration and Air Conditioning (HRAC) Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Heating, Refrigeration and Air Conditioning (HRAC) Technician Diploma program is granted a maximum of 57 transfer credits into the Bachelor of Technology program.
  • Heating, Refrigeration and Air Conditioning (HRAC) Technology Advanced Diploma program is granted a maximum of 63 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Heating, Refrigeration and Air Conditioning (HRAC) Technology Advanced Diploma program is granted a maximum of 57 transfer credits into the Bachelor of Technology program.
  • Mechanical Engineering Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Mechanical Engineering Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
  • Mechanical Engineering Technology Advanced Diploma program is granted a maximum of 66 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Mechanical Engineering Technology Advanced Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
  • Sustainable Energy and Building Technology Advanced Diploma program is granted a maximum of 69 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Sustainable Energy and Building Technology Advanced Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
    Humber students may apply after successfully completing the College's entire program and related requirements, if applicable.

Students applying for admission to any of the University programs are required to submit the university application form and applicable fees.  Students are subject to all University admission policies including the requirement to provide original documentation showing their full postsecondary academic history along with graduation with a relevant diploma from Humber.

For more information, contact: student@tru.ca 

Admission to the academic programs listed is at the sole discretion of the partner post-secondary institution. Please contact the institution for detailed admission requirements.

Programs:

  • Bachelor of Science
  • Electrical Engineering Technology: Electronics

Graduates of Humber's Electrical Engineering Technician diploma program are invited to apply to continue their studies at the State University of New York - Buffalo State College. Graduates must have a minimum overall GPA of 2.0 to be considered for advanced standing in the BSc, Electrial Engineering Technology: Electronics program. Humber graduates will be given the opportunity to complete all program requirements in approximately four semesters of full-time study (15 credit hours per semester).

For more information, please contact:

admissions@buffalostate.edu

TRANSFER OPTIONS

Can't find a pathway? You can still get the credit you deserve from your previous education or your prior work or life experience.

Learn more >

Contact Us

Program Specific Questions

Savdulla Kazazi, program co-ordinator
416.675.6622 ext. 4130
savdulla.kazazi@humber.ca

Current students, please send inquiries to: SATadvising@humber.ca.

Admissions Questions

Domestic Students  

Phone: 416-675-5000
Email: enquiry@humber.ca

International Students  

Contact the International Centre

How to Apply

Applications to Humber are made through ontariocolleges.ca. Be sure to submit your application by the equal consideration deadline of February 1. You may apply after February 1, however, post-February 1 applications will be considered on a first-come, first-served basis depending on the availability of the space in the program. To check program availability refer to the Campus/Availability listing on Humber's program pages or ontariocolleges.ca.

Admissions Road Map >

Apply through Ontario Colleges >

INTERNATIONAL STUDENTS

If you’re an international student, you can apply directly to Humber via our International Centre.

Apply through the International Centre >

close widget icon

Humber’s Electrical Engineering Technician – Control Systems diploma program focuses on three major concentrations in electrical engineering:

  • power industry
  • process instrumentation and control
  • programmable logic controllers (PLCs).

Our courses are designed in collaboration with an industry advisory panel, ensuring you learn current and relevant material. The program blends classroom theory with laboratory work on subjects such as electric devices and circuits, digital and programming fundamentals, power generation and distribution, electrical computer-aided design and drafting (CADD), electrical code, programmable logic controllers (PLCs), and technical communications.

Complex and challenging assignments prepare you for the realities of a control systems and electrical engineering career.

Courses Program Standards Learning Outcomes

Upon successful completion of the program, a graduate will:

  • Interpret and produce electrical and electronics drawings including other related documents and graphics.
  • Analyze and solve routine technical problems related to electrical systems by applying mathematics and science principles.
  • Use, verify, and maintain instrumentation equipment and systems.
  • Assemble, test, modify and maintain electrical circuits and equipment to fulfill requirements and specifications under the supervision of a qualified person.
  • Install and troubleshoot static and rotating electrical machines and associated control systems under the supervision of a qualified person.
  • Verify acceptable functionality and apply troubleshooting techniques for electrical and electronic circuits, components, equipment, and systems under the supervision of a qualified person.
  • Analyze, assemble and troubleshoot control systems under the supervision of a qualified person.
  • Use computer skills and tools to solve routine electrical related problems.
  • Assist in creating and conducting quality assurance procedures under the supervision of a qualified person.
  • Prepare and maintain records and documentation systems.
  • Install, test and troubleshoot telecommunication systems under the supervision of a qualified person.
  • Apply health and safety standards and best practices to workplaces.
  • Perform tasks in accordance with relevant legislation, policies, procedures, standards, regulations, and ethical principles.
  • Configure installation and apply electrical cabling requirements and system grounding and bonding requirements for a variety of applications under the supervision of a qualified person.
  • Assist in commissioning, testing and troubleshooting electrical power systems under the supervision of a qualified person.
  • Select electrical equipment, systems and components to fulfill the requirements and specifications under the supervision of a qualified person.
  • Apply project management principles to assist in the implementation of projects.


Close

Program Availability

START DATE LOCATION STATUS INTERNATIONAL STATUS
January 2019NorthOpenClosed
September 2019NorthOpenOpen
January 2020NorthOpenOpen

The Humber Advantage

harleen kang

Rewarding opportunities are available to those with specialized training in modern industrial equipment, which integrates the electrical engineering technology and instrumentation areas. Watch the video to find out more.

Facilities & Equipment

This advanced diploma program at Humber uses state of the art equipment in the labs for the students to get practical training which is augmented by the academic knowledge they gain during classroom teaching.

Software & Technology

The most up-to date software is used to simulate the real time solutions of today’s industrial needs in all the concentrations such as Power, Process Instrumentation and PLC Controls.

Spotlight: Temesgen

How did Work Placement Services help you prepare for your placement?

Your Career

Jump-start your career in the power industry, process instrumentation field as a control specialist or working with programmable logic controllers (PLCs).

Our graduates can find work as technicians – designing, maintaining, servicing or selling automated industrial, electrical machines, electrical control, power and process instrumentation systems and equipment.

Some employers of our graduates include ABB Inc., Aztec Electrical Supply, Canada Bread, City of Brampton, Street Lighting Department, Eastern Power Limited, Enersource Hydro Mississauga, Siemens Building Technologies Inc., Toronto Transit Commission (TTC), Hydro One and Ontario Power Generation.

Every attempt is made to ensure that information contained on this website is current and accurate. Humber reserves the right to correct any error or omission, modify or cancel any course, program, fee, timetable or campus location at any time without prior notice or liability to users or any other Person.

On June 29, 2018, the Provincial Government of Ontario announced the renaming of the Ministry of Advanced Education and Skills Development (MAESD) to the Ministry of Training, Colleges and Universities (MTCU). Both names may appear on this website.