Upon successful completion of the program, a graduate will:
- Analyze, interpret, and produce electrical and electronics drawings, technical reports including other related documents and graphics.
- Analyze and solve complex technical problems related to electrical systems by applying mathematics and science principles.
- Design, use, verify, and maintain instrumentation equipment and systems.
- Design, assemble, test, modify, maintain and commission electrical equipment and systems to fulfill requirements and specifications under the supervision of a qualified person.
- Commission and troubleshoot static and rotating electrical machines and associated control systems under the supervision of a qualified person.
- Design, assemble, analyze, and troubleshoot electrical and electronic circuits, components, equipment and systems under the supervision of a qualified person.
- Design, install, analyze, assemble and troubleshoot control systems under the supervision of a qualified person.
- Use computer skills and tools to solve a range of electrical related problems.
- Create, conduct and recommend modifications to quality assurance procedures under the supervision of a qualified person.
- Prepare reports and maintain records and documentation systems.
- Design, install, test, commission and troubleshoot telecommunication systems under the supervision of a qualified person.
- Apply and monitor health and safety standards and best practices to workplaces.
- Perform and monitor tasks in accordance with relevant legislation, policies, procedures, standards, regulations, and ethical principles.
- Configure installation and apply electrical cabling requirements and system grounding and bonding requirements for a variety of applications under the supervision of a qualified person.
- Design, commission, test and troubleshoot electrical power systems under the supervision of a qualified person.
- Select and recommend electrical equipment, systems and components to fulfill the requirements and specifications under the supervision of a qualified person.
- Apply project management principles to contribute to the planning, implementation, and evaluation of projects.
Work Placement
This program offers an optional co-op opportunity. Co-op work terms enable you to apply your skills and knowledge in a work environment and gain valuable and practical experience related to your program of study. You will improve personal and technical skills while expanding your professional network.
For students who are accepted into the program, three co-op work terms will take place. The first four-month work term is between Semesters 2 and 3, and then two consecutive four-month work terms occur between Semesters 4 and 5. While co-op work opportunities are not guaranteed, participating students will receive a wide range of services to help them find a co-op placement.
The Humber Advantage
State-Of-The-Art Facilities
This advanced diploma program at Humber uses state-of-the-art equipment in the labs for the students to get practical training which is augmented by the academic knowledge they gain during class room teaching. The most up-to date software is used to simulate the real time solutions of today’s industrial needs in all the concentrations such as Power, Process Instrumentation and PLC Controls.
Software and Technology
Students gain technical knowledge and skills in control systems, power system applications and design, equipment selection, installations, commissioning, testing and maintenance using state-of-the-art equipment, computers and software.
The Humber Experience
Humber Hosts FIRST Robotics Competition
In partnership with FIRST Robotics Canada
March 8 to 10, 2019
Combining the excitement of sport with the rigors of science and technology, the FIRSTRobotics Competition is the ultimate sport for the mind.
Your Career
According to Service Canada, the number of job opportunities for electrical and electronics technologists and technicians is expected to increase significantly over the next few years.
Our Electrical Engineering Technology graduates are capable of designing, maintaining, servicing or selling electrical equipment in a variety of industrial sectors including manufacturing, food, pharmaceutical, automotive, power generation and distribution, technical sales, transportation, and engineering consulting firms.
Program Availability
| START DATE | LOCATION | STATUS |
|---|---|---|
| September 2021 | North | Open |
| January 2022 | North | Open |
| START DATE | LOCATION | STATUS |
|---|---|---|
| September 2021 | North | Waitlisted |
| January 2022 | North | Opening Soon |
Electrical Engineering Technology Control Systems Program
Watch this video to see rewarding opportunities are available to those with specialized training in modern industrial equipment, which integrates the electrical engineering technology and instrumentation areas.
Humber
Faculty Who Lead to Inspire - Adriana Mema
Fri, March 26, 2021
Since joining the Faculty of Applied Sciences and Technology at Humber College in 2008, Adriana has seen the growth opportunities awaiting graduates in construction and infrastructure.
Faculty Who Lead to Inspire - Dr. Setareh Janbakhsh
Wed, February 24, 2021
Dr. Setareh Janbakhsh has built, modified, evaluated and improved air distribution systems and ventilation performance in structures around the globe.
Advanced Manufacturing & Engineering Technology Co-op & Work Placement Job Fair 2020
Tue, March 10, 2020
The Co-op and Work Placement Services hosted an Advanced Manufacturing & Engineering Technology Job Fair for placement and new co-op program students.
No news at this time.
Faculty of Applied Sciences & Technology Events
Last Day of Classes
Humber
Fri, December 13, 2019
All Campuses
Faculty of Applied Sciences & Technology News
Bachelor of Industrial Design Thesis Show 2020
Thu, March 12, 2020
(and onward)
Supply Chain Management Annual Career Networking Event
Wed, March 11, 2020
The annual Supply Chain Management Career Fair was another very successful event hosted by Work Placement Services.
No news at this time.
Every attempt is made to ensure that information contained on this website is current and accurate. Humber reserves the right to correct any error or omission, modify or cancel any course, program, fee, timetable or campus location at any time without prior notice or liability to users or any other Person.
On October 21, 2019, the Provincial Government of Ontario announced the renaming of the Ministry of Training, Colleges and Universities (MTCU) to the Ministry of Colleges and Universities (MCU). Both names may appear on this website.
Scroll down to close
HOW TO APPLY
ADMISSION REQUIREMENTS
EQUIPMENT & DEVICE REQUIREMENTS
FEES & SCHOLARSHIPS
PATHWAYS
CONTACT US
Post-Admission Requirements
Once you have been accepted, and have confirmed your offer, you may need to complete a further set of requirements related to your program (Post-Admission Requirements).
Equipment & Device Requirements
| Details and Specifications | Minimum Specs | Recommended Specs |
| Processor | Intel i7 or AMD 64-bit processor, 2.4GHz or faster | Intel i7 or Xeon E3, 3.2GHz or faster |
| OS | Windows 7 or 8/8.1 -64 bit professional | Windows 7, 8.x or 10 - 64-bit professional |
| Memory | 8 GB | 32 GB |
| Video | OpenGL 3.2 support w 1GB memory. No onboard graphics | NVIDIA Quadro or AMD FirePro/Radeon Pro Card w/ 4 GB dedicated memory |
| Monitor | 1920*1080 resolution | 1920*1080 resolution (or higher) resolution, dual monitors |
| Storage | Hard drive w/ 20GB free USB and/or DVD drive | Solid State Drive (SSD) w/20GB free |
Contact Information
If you have questions about these Equipment & Device Requirements contact:
Savdulla Kazazi, program co-ordinator
416.675.6622 ext. 4130
savdulla.kazazi@humber.ca
Fees
The 2020-2021 fee for two semesters was:
- domestic: $3,755.64
- international: $17,027.00
Fees are subject to change.
Fees by Semester
Domestic Fees International FeesAdditional Costs
Students must purchase Electronics Work Bench software, lab kit and a digital multimeter. Extra fees apply for optional work placement.
Scholarships
Humber Scholarships
Find out more about scholarships and bursaries that you may be eligible for, visit Student Scholarships.
Humber Bursaries
Bursaries are available for Certificate, Diploma and Degree programs primarily based on financial need, visit Humber Bursaries.
External Awards, Bursaries & Scholarships
Find out more information about external scholarships and bursaries, visit External Awards.
Indigenous Student Awards, Bursaries & Scholarships
Humber offers a variety of bursaries and scholarships for Indigenous students, visit Indigenous Student Awards.
Pathways
Pathways are academic routes that students can take to move from one credential to another.
PATHWAYS OUT TO ANOTHER PROGRAM:
WITHIN HUMBER
Graduates with an overall grade point average (GPA) of 65 per cent or more may be considered for admission. Graduates may then complete the degree with the equivalent of four semesters of full-time study plus a work term. Successful applicants must also possess:
- ENG4U or Humber’s WRIT 100 or 200 level course, or equivalent, with a minimum grade of 65 per cent.
- Any Grade 12U-level Mathematics with a minimum grade of 60 per cent, or Humber's TMTH 104 and TMTH 204, with an avaerage of 60 per cent.
Admission will be based on availability in the program.
*The advanced standing outlined is a general guideline. Diploma graduates may be required to take courses in lower semesters in order to meet the overall degree learning outcomes.
Apply for this degree starting in Fall >$2500.00 Diploma to Degree Transfer Student Scholarship
All students who have achieved a cumulative program grade point average (GPA) of 80% or better upon graduation of their Ontario college diploma will be automatically awarded a one-time scholarship of $2,500 in recognition of their academic achievement at the diploma level.
TO A PARTNER INSTITUTION
Bachelor of Technology in Technology Management
The British Columbia Institute of Technology (BCIT) recognizes Humber College's Advanced Diplomas in:
- Civil Engineering Technology
- Computer Engineering Technology
- Electrical Engineering Technology
- Electromechanical Engineering Technology
- Electronics Engineering Technology
- Mechanical Engineering Technology
- Sustainable Energy and Building Technology
as the academic basis of entry into the Bachelor of Technology in Technology Management degree program. Applicants from Humber College who have:
- been awarded an Advanced Diploma as above
- an overall minimum GPA of 65%
- two years of education in English in an English-speaking country with one of the following:
- Grade 12 English (67%) or
- 3.0 credits of postsecondary English, humanities or social sciences (67%) from a recognized institution
- minimum of one year relevant non-cooperative education related technical work experience
BCIT accepts applications for the program year-round. The first step in the application process is completion of a pre-entry assessment conducted by BCIT's program administrator to review the technical work experience requirement.
www.bcit.ca/study/programs/8350btech
Admission to the academic programs listed is at the sole discretion of the partner post-secondary institution. Please contact the institution for detailed admission requirements.
Applicants are encouraged to contact:
Laurie McGee, Program Administrator,
604.432.8459
Laurie_McGee@bcit.ca
Bachelor of Technology
Graduates of Humber's Electrical Engineering Technology Advanced Diploma may transfer into Thompson Rivers University's online degree programs:
- maximum of 66 transfer credits into the Bachelor of Technology - Trades and Technology Leadership
- maximum of 63 transfer credits into the Bachelor of Technology
Students applying for admission to any of the University programs are required to submit the university application form and applicable fees. Students are subject to all University admission policies including the requirement to provide original documentation showing their full postsecondary academic history along with graduation with a relevant diploma from Humber.
Admission to the academic programs listed is at the sole discretion of the partner post-secondary institution. Please contact the institution for detailed admission requirements.
For more information, contact: student@tru.ca
Bachelor of Technology - Trades and Technology Leadership
Graduates of Humber's Electrical Engineering Technology Advanced Diploma may transfer into Thompson Rivers University's online degree programs:
- maximum of 66 transfer credits into the Bachelor of Technology - Trades and Technology Leadership
- maximum of 63 transfer credits into the Bachelor of Technology
Students applying for admission to any of the University programs are required to submit the university application form and applicable fees. Students are subject to all University admission policies including the requirement to provide original documentation showing their full postsecondary academic history along with graduation with a relevant diploma from Humber.
Admission to the academic programs listed is at the sole discretion of the partner post-secondary institution. Please contact the institution for detailed admission requirements.
For more information, contact: student@tru.ca
Bachelor of Engineering Technology, Electronics & Controls
Humber graduates may receive advanced standing (36 credits) into Cape Breton University's Bachelor of Engineering Technology, Electronics and Controls upon successful completion of the Electrical, Electromechanical or Electronics Engineering Technology Advanced Diplomas. Normally, a minimum of one academic year of full time study is required to complete the program.
Click here for application information.
Admission to the academic programs listed is at the sole discretion of the partner post-secondary institution. Please contact the institution for detailed admission requirements.
For more information, see: https://www.cbu.ca/future-students/transfer-to-cbu/
Bachelor of Engineering Technology, Manufacturing
Humber graduates may receive advanced standing (30 credits) into Cape Breton University's Bachelor of Engineering Technology, Manufacturing program upon successful completion of the Electrical, Electromechanical, Electronics or Mechanical Engineering Technology Advanced Diplomas. Normally, a minimum of one academic year of full time study is required to complete the program.
Click here for application information.
Admission to the academic programs listed is at the sole discretion of the partner post-secondary institution. Please contact the institution for detailed admission requirements.
For more information, see: https://www.cbu.ca/future-students/transfer-to-cbu/
Bachelor of Engineering Technology, Petroleum
Humber graduates may receive advanced standing (36 credits) into Cape Breton University's Bachelor of Engineering Technology, Petroleum upon successful completion of the Civil, Electrical, Electromechanical, Electronics and Mechanical Engineering Technology, or Sustainable Energy and Building Technology Advanced Diplomas. Normally, a minimum of one academic year of full time study is required to complete the program.
Click here for application information.
Admission to the academic programs listed is at the sole discretion of the partner post-secondary institution. Please contact the institution for detailed admission requirements.
For more information, see: https://www.cbu.ca/future-students/transfer-to-cbu/
Bachelor of Science (Post Diploma)
Humber and Athabasca University have entered into an agreement that allows Civil Engineering Technology diploma, Computer Engineering Technology diploma, Electrical Engineering Technology - Control Systems diploma, Electromechanical Engineering Technology diploma, Electronics Engineering Technology diploma, Heating, Refrigeration and Air Conditioning Technology diploma, and Mechanical Engineering Technology diploma graduates the ability to progress directly into the Bachelor of Science (PD) with advanced standing of 60 credits provided all other entrance criteria are met and space remains available.
Civil Engineering Technology diploma, Computer Engineering Technology diploma, Electrical Engineering Technology - Control Systems diploma, Electromechanical Engineering Technology diploma, Electronics Engineering Technology diploma, Heating, Refrigeration and Air Conditioning Technology diploma, and Mechanical Engineering Technology diploma graduates may also progress directly into the Bachelor of Science (PD) with advanced standing of 30 credits* in the following specializations provided all other entrance criteria are met and space remains available:
- Applied Mathematics
- Computing Information Systems
- Human Science
For additional information, contact Athabasca's Transfer Credit Services
Admission to the academic programs listed is at the sole discretion of the partner post-secondary institution. Please contact the institution for detailed admission requirements.
BSc (Post Diploma) with major in Applied Mathematics
Humber and Athabasca University have entered into an agreement that allows Civil Engineering Technology diploma, Computer Engineering Technology diploma, Electrical Engineering Technology - Control Systems diploma, Electromechanical Engineering Technology diploma, Electronics Engineering Technology diploma, Heating, Refrigeration and Air Conditioning Technology diploma, and Mechanical Engineering Technology diploma graduates the ability to progress directly into the Bachelor of Science (PD) with advanced standing of 60 credits provided all other entrance criteria are met and space remains available.
Civil Engineering Technology diploma, Computer Engineering Technology diploma, Electrical Engineering Technology - Control Systems diploma, Electromechanical Engineering Technology diploma, Electronics Engineering Technology diploma, Heating, Refrigeration and Air Conditioning Technology diploma, and Mechanical Engineering Technology diploma graduates may also progress directly into the Bachelor of Science (PD) with advanced standing of 30 credits* in the following specializations provided all other entrance criteria are met and space remains available:
- Applied Mathematics
- Computing Information Systems
- Human Science
For additional information, contact Athabasca's Transfer Credit Services
Admission to the academic programs listed is at the sole discretion of the partner post-secondary institution. Please contact the institution for detailed admission requirements.
BSc (Post Diploma) with major in Computing Information Systems
Humber and Athabasca University have entered into an agreement that allows Civil Engineering Technology diploma, Computer Engineering Technology diploma, Electrical Engineering Technology - Control Systems diploma, Electromechanical Engineering Technology diploma, Electronics Engineering Technology diploma, Heating, Refrigeration and Air Conditioning Technology diploma, and Mechanical Engineering Technology diploma graduates the ability to progress directly into the Bachelor of Science (PD) with advanced standing of 60 credits provided all other entrance criteria are met and space remains available.
Civil Engineering Technology diploma, Computer Engineering Technology diploma, Electrical Engineering Technology - Control Systems diploma, Electromechanical Engineering Technology diploma, Electronics Engineering Technology diploma, Heating, Refrigeration and Air Conditioning Technology diploma, and Mechanical Engineering Technology diploma graduates may also progress directly into the Bachelor of Science (PD) with advanced standing of 30 credits* in the following specializations provided all other entrance criteria are met and space remains available:
- Applied Mathematics
- Computing Information Systems
- Human Science
For additional information, contact Athabasca's Transfer Credit Services
Admission to the academic programs listed is at the sole discretion of the partner post-secondary institution. Please contact the institution for detailed admission requirements.
BSc (Post Diploma) with major in Human Science
Humber and Athabasca University have entered into an agreement that allows Civil Engineering Technology diploma, Computer Engineering Technology diploma, Electrical Engineering Technology - Control Systems diploma, Electromechanical Engineering Technology diploma, Electronics Engineering Technology diploma, Heating, Refrigeration and Air Conditioning Technology diploma, and Mechanical Engineering Technology diploma graduates the ability to progress directly into the Bachelor of Science (PD) with advanced standing of 60 credits provided all other entrance criteria are met and space remains available.
Civil Engineering Technology diploma, Computer Engineering Technology diploma, Electrical Engineering Technology - Control Systems diploma, Electromechanical Engineering Technology diploma, Electronics Engineering Technology diploma, Heating, Refrigeration and Air Conditioning Technology diploma, and Mechanical Engineering Technology diploma graduates may also progress directly into the Bachelor of Science (PD) with advanced standing of 30 credits* in the following specializations provided all other entrance criteria are met and space remains available:
- Applied Mathematics
- Computing Information Systems
- Human Science
For additional information, contact Athabasca's Transfer Credit Services
Admission to the academic programs listed is at the sole discretion of the partner post-secondary institution. Please contact the institution for detailed admission requirements.
Honours Bachelor of Interdisciplinary Studies
Humber and Seneca Colleges have entered into an agreement that increases student opportunities for degree completion at both institutions. Humber graduates may transfer into Seneca’s Honours Bachelor of Interdisciplinary Studies with entry into Semester 5, Year 3 of the program.
Admissions:
All applicants to Seneca degree programs are required to have successfully completed the related Humber program with a minimum overall Grade Point Average (GPA) of 3.0 (70%).
All applicants may apply through the Ontario College Application Service and must submit an official academic transcript for all course work completed at the postsecondary level. The application must be received no later than the stated deadline for the given term being applied for in order to qualify for admission.
For further information, please contact: academic.pathways@senecacollege.ca
Admission to the academic programs listed is at the sole discretion of the partner post-secondary institution. Please contact the institution for detailed admission requirements.
Law LLB
Humber students who have successfully completed a Diploma or Advanced Diploma in any field at Humber College and meet the requirements, will be considered for admission into the University of Gloucestershire's Bachelor of Law LLB program.
International students should demonstrate and must provide evidence that they have attained a level of English equivalent to IELTS 6.5 overall with a minimum of 6.0 in writing. Alternative acceptable English Language qualifications can be found at: www.glos.ac.uk/study/international
Students will be expected to attend an Academic Induction preceding entry to the program. Students admitted to the UoG program will pay the appropriate annual tuition fee rate. The definitive fees will be those published here: http://www.glos.ac.uk/international
Students admitted to UoG from Humber will be eligible to receive the international bursary. This award, and its ruling terms and conditions, is subject to change on an annual basis. For September 2020/January 2021 entry, the applicable bursary is £3,000, and will be automatically applied against tuition for successful applicants from Humber. Please note that the bursary is only available to students who are studying full-time at the UoG on campus in the UK, and completing a full degree (not available for distance learning or master's stage students).
Admission to the academic programs listed is at the sole discretion of the partner post-secondary institution. Please contact the institution for detailed admission requirements.
Contact us for more information:
Shandin Rickard-Hughes
International Marketing & Student Recruitment Manager, Americas
srickardhughes@glos.ac.uk
How to Apply
Applications to Humber are made through ontariocolleges.ca. Be sure to submit your application by the equal consideration deadline of February 1. You may apply after February 1, however, post-February 1 applications will be considered on a first-come, first-served basis depending on the availability of the space in the program. To check program availability refer to the Campus/Availability listing on Humber's program pages or ontariocolleges.ca.
INTERNATIONAL STUDENTS
If you’re an international student, you can apply directly to Humber via our International Centre.
