Skip to content

Electronics Engineering Technician

Credential: DiplomaProgram Code: 03531Length: 4 semestersProgram Starting Between:  

Admission Requirements

Applicants must meet all the requirements below in order to meet minimum program eligibility. Meeting minimum eligibility requirements does not guarantee an offer of admission. Admission decisions will be available via MyHumber, or by email and mail. Admission decisions will not be released by phone.

Admission selection is based on the following 3 requirements:

  • Academic

    To be eligible for admission, you must possess the following:

    • Ontario Secondary School Diploma (OSSD) or equivalent including these required courses:
      • Grade 12 English (ENG4C or ENG4U or equivalent)
      • Grade 12 Mathematics (MAP4C, MCT4C, MDM4U, MCB4U, MGA4U, MCV4U or MHF4U or equivalent)
      • Two Grade 11 or Grade 12 C, M or U courses in addition to those listed above

    or

    or

    Mature Applicants

    Diplomas and Certificates

    An applicant is considered a mature applicant if they have not completed secondary school or other postsecondary school, and will be 19 or older as of the first day of classes. Humber will invite you for testing to demonstrate that you meet program eligibility.

    Degrees

    An applicant is considered a mature applicant if they have not completed secondary school or attended postsecondary studies, and will be 21 or older as of the first day of classes. Mature applicants for degree programs will be required to meet course requirements at the U/M level or equivalent.

    College Transfer Applicants

    Diplomas and Certificates

    An applicant is considered a college transfer applicant if they have completed some or all of a college-level credential. Humber may use a combination of secondary school and/or college courses and grades to determine program eligibility.

    Degrees

    An applicant is considered a college transfer applicant if they have completed some or all of a college-level credential. Humber may use a combination of secondary school and/or college courses and grades to determine program eligibility. Applicants must have an overall minimum grade point average (GPA) of 65 per cent in the program. Applicants are required to disclose and provide academic transcripts for all course work completed at the postsecondary level.

    University Transfer Applicants

    Diplomas and Certificates

    An applicant is considered a university transfer applicant if they have completed some or all of a university-level credential. Humber may use a combination of secondary school and/or university courses and grades to determine program eligibility.

    Degrees

    An applicant is considered a university transfer applicant if they have completed some or all of a university-level credential. Humber may use a combination of secondary school and/or university courses and grades to determine program eligibility. Applicants are required to disclose and provide academic transcripts for all course work completed at the postsecondary level.

  • English Language Proficiency

    All applicants whose first language is not English must meet Humber’s English Language Proficiency Policy.

  • International Credit Evaluation

    Canadian citizens or permanent residents with international education are required to provide a WES or ICAS evaluation.

INTERNATIONAL ACADEMIC EQUIVALENCY

Admission equivalencies for Humber depend on your country of study. Please enter your location or choose detect my location to see the requirements for your country below.

Post-Admission Requirements

Once you have been accepted, and have confirmed your offer, you may need to complete a further set of requirements related to your program (Post-Admission Requirements).

Not available

Fees

The 2018-2019 fee for two semesters was:

  • domestic: $3,975.70
  • international: $14,964.00

Fees are subject to change.

Scholarships

Humber offers a variety of scholarships each year.

Learn more >

Fees by Semester 

Fees by Semester

Semester 1Domestic FeeInternational Fee*
Total$2,014.35$7,272.00
Tuition$1,501.57$6,759.22
Mandatory Non-Tuition$459.78$459.78
Lab/Materials$53.00$53.00
Co-op/Placement$0.00$0.00

 

Semester 2Domestic FeeInternational Fee*
Total$1,961.35$7,272.00
Tuition$1,501.57$6,812.22
Mandatory Non-Tuition$459.78$459.78
Lab/Materials$0.00$0.00
Co-op/Placement$0.00$0.00

 

Semester 3Domestic FeeInternational Fee*
Total$1,961.35$7,272.00
Tuition$1,501.57$6,812.22
Mandatory Non-Tuition$459.78$459.78
Lab/Materials$0.00$0.00
Co-op/Placement$0.00$0.00

 

Semester 4Domestic FeeInternational Fee*
Total$1,961.35$7,272.00
Tuition$1,501.57$6,812.22
Mandatory Non-Tuition$459.78$459.78
Lab/Materials$0.00$0.00
Co-op/Placement$0.00$0.00

*Plus Mandatory Health Insurance fee once per academic year: Fall start - $420 Winter start - $280 Summer start - $140

Pathways

Pathways are academic routes that students can take to move from one credential to another.

PATHWAYS WITHIN HUMBER AFTER THIS PROGRAM

Upon completion of this program, graduates can continue into the third year of Electronics Engineering Technology program

PATHWAYS OUT TO A PARTNER INSTITUTION

Programs:

  • Bachelor of Technology
  • Bachelor of Technology - Trades and Technology Leadership

The following Humber programs will articulate with specific transfer credits into the Bachelor of Technology or the Bachelor of Technology - Trades and Technology Leadership programs at Thompson Rivers University:

  • Architectural Technology Advanced Diploma program is granted a maximum of 69 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Architectural Technology Advanced Diploma program is granted a maximum of 63 transfer credits into the Bachelor of Technology program.
  • Civil Engineering Technology Advanced Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
  • Computer and Network Support Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Computer and Network Support Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
  • Computer Engineering Technology Advanced Diploma program is granted a maximum of 66 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Computer Engineering Technology Advanced Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
  • Electrical Engineering Technician - Control Systems Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Electrical Engineering Technician - Control Systems Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
  • Electrical Engineering Technology - Control Systems Advanced Diploma program is granted a maximum of 66 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Electrical Engineering Technology - Control Systems Advanced Diploma program is granted a maximum of 63 transfer credits into the Bachelor of Technology program.
  • Electromechanical Engineering Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Electromechanical Engineering Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
  • Electromechanical Engineering Technology Advanced Diploma program is granted a maximum of 69 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Electromechanical Engineering Technology Advanced Diploma program is granted a maximum of 63 transfer credits into the Bachelor of Technology program.
  • Electronics Engineering Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Electronics Engineering Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
  • Electronics Engineering Technology Advanced Diploma program is granted a maximum of 69 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Electronics Engineering Technology Advanced Diploma program is granted a maximum of 63 transfer credits into the Bachelor of Technology program.
  • Heating, Refrigeration and Air Conditioning (HRAC) Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Heating, Refrigeration and Air Conditioning (HRAC) Technician Diploma program is granted a maximum of 57 transfer credits into the Bachelor of Technology program.
  • Heating, Refrigeration and Air Conditioning (HRAC) Technology Advanced Diploma program is granted a maximum of 63 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Heating, Refrigeration and Air Conditioning (HRAC) Technology Advanced Diploma program is granted a maximum of 57 transfer credits into the Bachelor of Technology program.
  • Mechanical Engineering Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Mechanical Engineering Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
  • Mechanical Engineering Technology Advanced Diploma program is granted a maximum of 66 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Mechanical Engineering Technology Advanced Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
  • Sustainable Energy and Building Technology Advanced Diploma program is granted a maximum of 69 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Sustainable Energy and Building Technology Advanced Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
    Humber students may apply after successfully completing the College's entire program and related requirements, if applicable.

Students applying for admission to any of the University programs are required to submit the university application form and applicable fees.  Students are subject to all University admission policies including the requirement to provide original documentation showing their full postsecondary academic history along with graduation with a relevant diploma from Humber.

For more information, contact: student@tru.ca 

Admission to the academic programs listed is at the sole discretion of the partner post-secondary institution. Please contact the institution for detailed admission requirements.

Programs:

  • Bachelor of Science
  • Industrial Technology
  • Bachelor of Science
  • Electrical Engineering Technology: Electronics

Graduates of Humber's Electronics Engineering Technician diploma program are invited to apply to continue their studies at the State University of New York - Buffalo State College. Graduates must have a minimum overall GPA of 2.0 with a background in Technical Science or Mathematics to be considered for advanced standing in the BSc, Industrial Technology program. Humber graduates will be given the opportunity to complete all program requirements in approximately four semesters of full-time study (15 credit hours per semester).

For more information, please contact:

admissions@buffalostate.edu

TRANSFER OPTIONS

Can't find a pathway? You can still get the credit you deserve from your previous education or your prior work or life experience.

Learn more >

Contact Us

Program Specific Questions

George Livanos, program co-ordinator
416.675.6622 ext. 4329
george.livanos@humber.ca

Current students please send inquiries to: SATadvising@humber.ca.

Admissions Questions

Domestic Students  

Phone: 416-675-5000
Email: enquiry@humber.ca

International Students  

Contact the International Centre

How to Apply

Applications to Humber are made through ontariocolleges.ca. Be sure to submit your application by the equal consideration deadline of February 1. You may apply after February 1, however, post-February 1 applications will be considered on a first-come, first-served basis depending on the availability of the space in the program. To check program availability refer to the Campus/Availability listing on Humber's program pages or ontariocolleges.ca.

Admissions Road Map >

Apply through Ontario Colleges >

INTERNATIONAL STUDENTS

If you’re an international student, you can apply directly to Humber via our International Centre.

Apply through the International Centre >

close widget icon

Humber’s Electronics Engineering Technician diploma program emphasizes electronic products, control systems and telecommunications - all built on a strong basis of computer and networking engineering. You’ll spend approximately half your time in labs developing hands-on knowledge of electronic, analog, digital and programmable circuits. Industry leaders will teach you about computer programming and interfacing, local area networks, radio frequency circuits, basic programmable logic controllers, industrial electronics, wired and wireless telephones, and troubleshooting techniques. You’ll be taught how to embed these circuits into cell phones, audio and high-definition (HD) video systems, robots, computers, and advanced instruments.

You’ll also build and test circuit boards, learn soldering techniques, and program industrial controllers and embedded systems in our state-of-the-art labs.

This program shares curriculum with the first two years of a three-year program in Electronics Engineering Technology. Many students who complete these two years and graduate as technicians continue on for one more year to the advanced diploma and become technologists.

Courses Program Standards Learning Outcomes

Upon successful completion of the program, a graduate will:

  • Analyze*, interpret, modify and prepare electrical and electronics drawings, layouts and reports, with guidance as required.
  • Analyze* and solve routine technical problems related to electronics engineering by applying fundamental concepts of mathematics and science.
  • Apply appropriate troubleshooting* techniques to electronic circuits or systems and perform test procedures.
  • Assemble, modify, test and troubleshoot* electronic circuits, equipment and systems in accordance with job requirements*, functional specifications* and relevant standards, with guidance as required.
  • Maintain and repair electronic equipment and systems in accordance with relevant operational guidelines.
  • Provide justification for the purchase of electronic equipment, components and systems in accordance with code, standards and job requirements*, and functional specifications*.
  • Analyze* and troubleshoot* logic and digital circuits, as well as embedded microprocessor*-based and microcontroller*-based systems, including assembly and high-level language programs.
  • Analyze* and troubleshoot* circuits consisting of passive components by applying appropriate measurement techniques.
  • Analyze* and troubleshoot* circuits consisting of low power, high power, active and electromechanical components, and analog integrated circuits.
  • Analyze* and troubleshoot* control systems.
  • Troubleshoot*, maintain and repair analog and digital communication systems.
  • Apply relevant shop practices* in compliance with safety policies and current regulations for electronics engineering workplaces.
  • Assist in implementing and conducting quality control* and quality assurance* programs and procedures.
  • Complete work in compliance with relevant legislation, established standards, policies, procedures and regulations, and ethical principles.


Close

Program Availability

START DATE LOCATION STATUS INTERNATIONAL STATUS
January 2019NorthOpenClosed
September 2019NorthOpenOpen
January 2020NorthOpenOpen

The Humber Advantage

electronics engineering student

Watch the video on a student testimonial in the Electronics Engineering Technology program.

Software & Technology

Graduates who seek high-end jobs as well as those who choose to continue on to university, will find themselves well prepared and comfortable with high-end software tools such as SPICE-based circuit simulators, VHDL, MATLAB, SIMULINK, LabVIEW and the signal and image processing toolboxes routinely used in industry and university programs.

Albert Jansen Wins Award

albert jansen

This year, the School of Applied Technology chose Albert Jansen as the recipient of the Board of Governor's Award. Academically, Albert was one of the top students throughout the three years of the Electronics Engineering Technology program.

Special Events

Humberwood students

National Engineering Month is Canada’s largest celebration of engineering excellence, and this year students from Humber’s Electronics Engineering Technology program teamed up withHumberwood Downs Junior Middle Academy to give middle school students a taste of how electronics technology and green energy are an important part of Canada’s future, and they even got a chance to try their hand at building electronic circuits! 

Your Career

According to the Electro-Federation Canada, companies that design, install, manufacture, distribute and service electrical, electronic and telecommunications products contribute more than $50 billion to the Canadian economy while employing more than 130,000 workers at 1,400 facilities in Canada.

Our graduates have found employment with major users of large electronics systems such as broadcasting networks (including CBC, CTV), telecommunication carriers (including Rogers, Telus, Bell), manufacturers of electronics equipment (including Creation Technologies, Celestica, GE Canada), and manufacturers of scientific, medical and industrial instrumentation. Other graduates have started their own businesses or progressed to positions such as company representatives, technical salespeople and managers.

Every attempt is made to ensure that information contained on this website is current and accurate. Humber reserves the right to correct any error or omission, modify or cancel any course, program, fee, timetable or campus location at any time without prior notice or liability to users or any other Person.

On June 29, 2018, the Provincial Government of Ontario announced the renaming of the Ministry of Advanced Education and Skills Development (MAESD) to the Ministry of Training, Colleges and Universities (MTCU). Both names may appear on this website.