Skip to content

Electrical Engineering Technology - Control Systems

Credential: Advanced DiplomaProgram Code: 30101Length: 6 semestersProgram Starting Between:  

Admission Requirements

Applicants must meet all the requirements below in order to meet minimum program eligibility. Meeting minimum eligibility requirements does not guarantee an offer of admission. Admission decisions will be available via MyHumber, or by email and mail. Admission decisions will not be released by phone.

Admission selection is based on the following 3 requirements:

  • Academic

    To be eligible for admission, you must possess the following:

    • Ontario Secondary School Diploma (OSSD) or equivalent including these required courses:
      • Grade 12 English (ENG4C or ENG4U or equivalent)
      • Grade 12 Mathematics (MAP4C, MCT4C, MDM4U, MCB4U, MGA4U, MCV4U or MHF4U or equivalent)
      • Two Grade 11 or Grade 12 C, M or U courses in addition to those listed above

    or

    or

    Mature Applicants

    Diplomas and Certificates

    An applicant is considered a mature applicant if they have not completed secondary school or other postsecondary school, and will be 19 or older as of the first day of classes. Humber will invite you for testing to demonstrate that you meet program eligibility.

    Degrees

    An applicant is considered a mature applicant if they have not completed secondary school or attended postsecondary studies, and will be 21 or older as of the first day of classes. Mature applicants for degree programs will be required to meet course requirements at the U/M level or equivalent.

    College Transfer Applicants

    Diplomas and Certificates

    An applicant is considered a college transfer applicant if they have completed some or all of a college-level credential. Humber may use a combination of secondary school and/or college courses and grades to determine program eligibility.

    Degrees

    An applicant is considered a college transfer applicant if they have completed some or all of a college-level credential. Humber may use a combination of secondary school and/or college courses and grades to determine program eligibility. Applicants must have an overall minimum grade point average (GPA) of 65 per cent in the program. Applicants are required to disclose and provide academic transcripts for all course work completed at the postsecondary level.

    University Transfer Applicants

    Diplomas and Certificates

    An applicant is considered a university transfer applicant if they have completed some or all of a university-level credential. Humber may use a combination of secondary school and/or university courses and grades to determine program eligibility.

    Degrees

    An applicant is considered a university transfer applicant if they have completed some or all of a university-level credential. Humber may use a combination of secondary school and/or university courses and grades to determine program eligibility. Applicants are required to disclose and provide academic transcripts for all course work completed at the postsecondary level.

  • English Language Proficiency

    All applicants whose first language is not English must meet Humber’s English Language Proficiency Policy.

  • International Credit Evaluation

    Canadian citizens or permanent residents with international education are required to provide a WES or ICAS evaluation.

INTERNATIONAL ACADEMIC EQUIVALENCY

Admission equivalencies for Humber depend on your country of study. Please enter your location or choose detect my location to see the requirements for your country below.

Post-Admission Requirements

Once you have been accepted, and have confirmed your offer, you may need to complete a further set of requirements related to your program (Post-Admission Requirements).

Not available

Fees

The 2018-2019 fee for two semesters was:

  • domestic: $3,937.70
  • international: $14,964.00

Fees are subject to change.

Scholarships

Humber offers a variety of scholarships each year.

Learn more >

Fees by Semester 

Fees by Semester

Semester 1Domestic FeeInternational Fee*
Total$1,976.35$7,272.00
Tuition$1,501.57$6,797.22
Mandatory Non-Tuition$459.78$459.78
Lab/Materials$15.00$15.00
Co-op/Placement$0.00$0.00

 

Semester 2Domestic FeeInternational Fee*
Total$1,961.35$7,272.00
Tuition$1,501.57$6,812.22
Mandatory Non-Tuition$459.78$459.78
Lab/Materials$0.00$0.00
Co-op/Placement$0.00$0.00

 

Semester 3Domestic FeeInternational Fee*
Total$1,961.35$7,272.00
Tuition$1,501.57$6,812.22
Mandatory Non-Tuition$459.78$459.78
Lab/Materials$0.00$0.00
Co-op/Placement$0.00$0.00

 

Semester 4Domestic FeeInternational Fee*
Total$1,961.35$7,272.00
Tuition$1,501.57$6,812.22
Mandatory Non-Tuition$459.78$459.78
Lab/Materials$0.00$0.00
Co-op/Placement$0.00$0.00

 

Semester 5Domestic FeeInternational Fee*
Total$1,961.35$7,272.00
Tuition$1,501.57$6,812.22
Mandatory Non-Tuition$459.78$459.78
Lab/Materials$0.00$0.00
Co-op/Placement$0.00$0.00

 

Semester 6Domestic FeeInternational Fee*
Total$1,961.35$7,272.00
Tuition$1,501.57$6,812.22
Mandatory Non-Tuition$459.78$459.78
Lab/Materials$0.00$0.00
Co-op/Placement$0.00$0.00

*Plus Mandatory Health Insurance fee once per academic year: Fall start - $420 Winter start - $280 Summer start - $140

Additional Costs

Students must purchase Electronics Work Bench software, lab kit and a digital multimeter. Extra fees apply for optional work placement. 

Pathways

Pathways are academic routes that students can take to move from one credential to another.

PATHWAYS WITHIN HUMBER AFTER THIS PROGRAM

Graduates with an overall grade point average (GPA) of 65 per cent or more may be considered for admission. Graduates may then complete the degree with the equivalent of four semesters of full-time study plus a work term. Successful applicants must also possess:

  • ENG4U or Humber’s WRIT 100 or 200 level course, or equivalent, with a minimum grade of 65 per cent.
  • Any Grade 12U-level Mathematics with a minimum grade of 60 per cent, or Humber's TMTH 104 and TMTH 204, with an avaerage of 60 per cent.

Admission will be based on availability in the program.

*The advanced standing outlined is a general guideline. Diploma graduates may be required to take courses in lower semesters in order to meet the overall degree learning outcomes.

Diploma to Degree Transfer Student Scholarship

All students who have achieved a cumulative program grade point average (GPA) of 80% or better upon graduation of their Ontario college diploma will be automatically awarded a one-time scholarship of $2,500 in recognition of their academic achievement at the diploma level.

PATHWAYS OUT TO A PARTNER INSTITUTION

Programs:

  • Bachelor of Engineering Technology
  • Electronics & Controls
  • Bachelor of Engineering Technology
  • Manufacturing
  • Bachelor of Engineering Technology
  • Petroleum

Humber and Cape Breton University have agreed to partner for the purpose of offering a degree completion option to students of the following programs:

  • Electrical Engineering Technology
  • Electronics Engineering Technology

Students completing these programs will receive up to a maximum of 36 transfer credits.  Normally one academic year (2 semesters) of full time study is required to complete the degree.  

A number of CBU courses are available by distance including some of the required courses for the Bachelor of Engineering Technology program and may, in some instances, be the ony offering of that particular course that year.  CBU distance courses can be used to fulfill the credit residency requirement.

For more information see:  https://www.cbu.ca/academic-programs/program/electronics-and-controls/program-details/

Admission to the academic programs listed is at the sole discretion of the partner post-secondary institution. Please contact the institution for detailed admission requirements.

Programs:

  • Bachelor of Technology
  • Bachelor of Technology - Trades and Technology Leadership

The following Humber programs will articulate with specific transfer credits into the Bachelor of Technology or the Bachelor of Technology - Trades and Technology Leadership programs at Thompson Rivers University:

  • Architectural Technology Advanced Diploma program is granted a maximum of 69 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Architectural Technology Advanced Diploma program is granted a maximum of 63 transfer credits into the Bachelor of Technology program.
  • Civil Engineering Technology Advanced Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
  • Computer and Network Support Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Computer and Network Support Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
  • Computer Engineering Technology Advanced Diploma program is granted a maximum of 66 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Computer Engineering Technology Advanced Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
  • Electrical Engineering Technician - Control Systems Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Electrical Engineering Technician - Control Systems Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
  • Electrical Engineering Technology - Control Systems Advanced Diploma program is granted a maximum of 66 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Electrical Engineering Technology - Control Systems Advanced Diploma program is granted a maximum of 63 transfer credits into the Bachelor of Technology program.
  • Electromechanical Engineering Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Electromechanical Engineering Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
  • Electromechanical Engineering Technology Advanced Diploma program is granted a maximum of 69 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Electromechanical Engineering Technology Advanced Diploma program is granted a maximum of 63 transfer credits into the Bachelor of Technology program.
  • Electronics Engineering Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Electronics Engineering Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
  • Electronics Engineering Technology Advanced Diploma program is granted a maximum of 69 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Electronics Engineering Technology Advanced Diploma program is granted a maximum of 63 transfer credits into the Bachelor of Technology program.
  • Heating, Refrigeration and Air Conditioning (HRAC) Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Heating, Refrigeration and Air Conditioning (HRAC) Technician Diploma program is granted a maximum of 57 transfer credits into the Bachelor of Technology program.
  • Heating, Refrigeration and Air Conditioning (HRAC) Technology Advanced Diploma program is granted a maximum of 63 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Heating, Refrigeration and Air Conditioning (HRAC) Technology Advanced Diploma program is granted a maximum of 57 transfer credits into the Bachelor of Technology program.
  • Mechanical Engineering Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Mechanical Engineering Technician Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
  • Mechanical Engineering Technology Advanced Diploma program is granted a maximum of 66 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Mechanical Engineering Technology Advanced Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
  • Sustainable Energy and Building Technology Advanced Diploma program is granted a maximum of 69 transfer credits into the Bachelor of Technology: Trades and Technology Leadership program.
  • Sustainable Energy and Building Technology Advanced Diploma program is granted a maximum of 60 transfer credits into the Bachelor of Technology program.
    Humber students may apply after successfully completing the College's entire program and related requirements, if applicable.

Students applying for admission to any of the University programs are required to submit the university application form and applicable fees.  Students are subject to all University admission policies including the requirement to provide original documentation showing their full postsecondary academic history along with graduation with a relevant diploma from Humber.

For more information, contact: student@tru.ca 

Admission to the academic programs listed is at the sole discretion of the partner post-secondary institution. Please contact the institution for detailed admission requirements.

Programs:

  • Bachelor of Technology in Technology Management

The British Columbia Institute of Technology (BCIT) recognizes Humber College's Advanced Diplomas in:

  • Civil Engineering Technology
  • Computer Engineering Technology
  • Electrical Engineering Technology
  • Electromechanical Engineering Technology
  • Electronics Engineering Technology
  • Mechanical Engineering Technology
  • Sustainable Energy and Building Technology

as the academic basis of entry into the Bachelor of Technology in Technology Management degree program. Applicants from Humber College who have:

  • been awarded an Advanced Diploma as above
  • an overall minimum GPA of 65%
  • two years of education in English in an English-speaking country with one of the following:
    • Grade 12 English (67%) or
    • 3.0 credits of postsecondary English, humanities or social sciences (67%) from a recognized institution
  • minimum of one year relevant non-cooperative education related technical work experience

BCIT accepts applications for the program year-round.  The first step in the application process is completion of a pre-entry assessment conducted by BCIT's program administrator to review the technical work experience requirement.  Applicants are encouraged to contact:

Laurie McGee, Program Administrator,
604.432.8459
Laurie_McGee@bcit.ca

www.bcit.ca/study/programs/8350btech

Admission to the academic programs listed is at the sole discretion of the partner post-secondary institution. Please contact the institution for detailed admission requirements.

TRANSFER OPTIONS

Can't find a pathway? You can still get the credit you deserve from your previous education or your prior work or life experience.

Learn more >

Contact Us

Program Specific Questions

Savdulla Kazazi, program co-ordinator
416.675.6622 ext. 4130
savdulla.kazazi@humber.ca

Current students, please send inquiries to: SATadvising@humber.ca.

Admissions Questions

Domestic Students  

Phone: 416-675-5000
Email: enquiry@humber.ca

International Students  

Contact the International Centre

How to Apply

Applications to Humber are made through ontariocolleges.ca. Be sure to submit your application by the equal consideration deadline of February 1. You may apply after February 1, however, post-February 1 applications will be considered on a first-come, first-served basis depending on the availability of the space in the program. To check program availability refer to the Campus/Availability listing on Humber's program pages or ontariocolleges.ca.

Admissions Road Map >

Apply through Ontario Colleges >

INTERNATIONAL STUDENTS

If you’re an international student, you can apply directly to Humber via our International Centre.

Apply through the International Centre >

close widget icon

Humber’s Electrical Engineering Technology – Control Systems advanced diploma program blends in-class, academic learning with hands-on laboratory work to prepare you for a career in electrical power and control systems engineering.

In the third year of this program, you’ll learn advanced skills for a thorough academic and practical approach to the control of electrical equipment and industrial process instrumentation in automated manufacturing, processing, power systems and utilities industries.

Our curriculum, designed in collaboration with industry, focuses on programming software, feed-back control system and motor control, instrumentation and programmable logic controllers (PLCs), power electronics, power generation, transmission and distribution, power system design, human machine interface (HMI) design, and supervisory control and data acquisition (SCADA). Superior mathematics, physics and critical thinking skills will be essential to your success.

The program builds upon the solid technical foundation of our technician program, ensuring wider career options. The skills learned in the technical program are enhanced through project-based learning and increased hands-on practice in the labs.


Courses Program Standards Learning Outcomes


Close

Upon successful completion of the program, a graduate will:

  • Analyze, interpret, and produce electrical and electronics drawings, technical reports including other related documents and graphics.
  • Analyze and solve complex technical problems related to electrical systems by applying mathematics and science principles.
  • Design, use, verify, and maintain instrumentation equipment and systems.
  • Design, assemble, test, modify, maintain and commission electrical equipment and systems to fulfill requirements and specifications under the supervision of a qualified person.
  • Commission and troubleshoot static and rotating electrical machines and associated control systems under the supervision of a qualified person.
  • Design, assemble, analyze, and troubleshoot electrical and electronic circuits, components, equipment and systems under the supervision of a qualified person.
  • Design, install, analyze, assemble and troubleshoot control systems under the supervision of a qualified person.
  • Use computer skills and tools to solve a range of electrical related problems.
  • Create, conduct and recommend modifications to quality assurance procedures under the supervision of a qualified person.
  • Prepare reports and maintain records and documentation systems.
  • Design, install, test, commission and troubleshoot telecommunication systems under the supervision of a qualified person.
  • Apply and monitor health and safety standards and best practices to workplaces.
  • Perform and monitor tasks in accordance with relevant legislation, policies, procedures, standards, regulations, and ethical principles.
  • Configure installation and apply electrical cabling requirements and system grounding and bonding requirements for a variety of applications under the supervision of a qualified person.
  • Design, commission, test and troubleshoot electrical power systems under the supervision of a qualified person.
  • Select and recommend electrical equipment, systems and components to fulfill the requirements and specifications under the supervision of a qualified person.
  • Apply project management principles to contribute to the planning, implementation, and evaluation of projects.


Close


Work Placement

This program offers a co-op option. Co-op work terms enable you to apply your skills and knowledge in a work environment and gain valuable, practical experience related to your program of study. You will learn new skills, learn about the world of work and meet people in your profession.

For students who are accepted into the program, three co-op work terms will take place. The first four-month work term is between Semesters 2 and 3, and then two consecutive four-month work terms between Semesters 4 and 5.  There are limited spaces in the co-op option. Therefore, you will apply for the co-op option during Semester 1 and be informed of the process by which to apply.  While co-op work opportunities are not guaranteed, as students are in a competitive job placement market, participating students will receive a wide range of services to help them find a co-op opportunity.

Program Availability

START DATE LOCATION STATUS INTERNATIONAL STATUS
January 2019NorthOpenClosed
September 2019NorthOpenOpen
January 2020NorthOpenOpen

The Humber Advantage

Watch the video to learn more about the Electrical Engineering Technology Control Systems program.

State-of-the-art Facilities

This advanced diploma program at Humber uses state of the art equipment in the labs for the students to get practical training which is augmented by the academic knowledge they gain during class room teaching. The most up-to date software is used to simulate the real time solutions of today’s industrial needs in all the concentrations such as Power, Process Instrumentation and PLC Controls.

Software and Technology

Students gain technical knowledge and skills in control systems, power system applications and design, equipment selection, installations, commissioning, testing and maintenance using state-of-the-art equipment, computers and software.

Your Career

According to Service Canada, the number of electrical and electronics engineer technologists and technicians is expected to increase significantly over the next few years. Those who have a postsecondary education will account for 81.4 per cent of those employed in the industry.

Engineering Canada forecasts the need for electrical engineers will increase as the economy improves. Our graduates find work as technologists who design, maintain, service or sell automated industrial, electrical machines, electrical control, power systems, power distribution protection and control, and process instrumentation systems and equipment.

Humber graduates have found employment in organizations that include ABB Inc., Aztec Electrical Supply, Canada Bread, City of Brampton, Street Lighting Department, Eastern Power Limited, Enersource Hydro Mississauga, Siemens Building Technologies Inc., Toronto Transit Commission (TTC), Hydro One and Ontario Power Generation.


Professional Accreditations & Recognition

Ontario Association of Certified Engineering Technicians and Technologists (OACETT)

Graduates may apply to become members of the Ontario Association of Certified Engineering Technicians and Technologists (OACETT).

Additional requirements and/or costs may apply.

Note: The requirements for licensure are determined by the granting body, which is independent from Humber College. Students are encouraged to obtain the specific requirements directly from the granting body before enrolling.



 

Every attempt is made to ensure that information contained on this website is current and accurate. Humber reserves the right to correct any error or omission, modify or cancel any course, program, fee, timetable or campus location at any time without prior notice or liability to users or any other Person.

On June 29, 2018, the Provincial Government of Ontario announced the renaming of the Ministry of Advanced Education and Skills Development (MAESD) to the Ministry of Training, Colleges and Universities (MTCU). Both names may appear on this website.