Skip to content

Cabinet Making

Credential: Certificate of AchievementProgram Code: 30991Length: 3 semestersProgram Starting Between:  

Admission Requirements

Applicants must meet all the requirements below in order to meet minimum program eligibility. Meeting minimum eligibility requirements does not guarantee an offer of admission. Admission decisions will be available via MyHumber, or by email and mail. Admission decisions will not be released by phone.

Admission selection is based on the following 3 requirements:

  • Academic

    To be eligible for admission, you must possess the following:

    • Ontario Secondary School Diploma (OSSD) or equivalent including these required courses:
      • Grade 12 English (ENG4C or ENG4U or equivalent)
      • Grade 12 Mathematics (MAP4C, MCT4C, MDM4U, MCB4U, MGA4U, MCV4U or MHF4U or equivalent)
      • Two Grade 11 or Grade 12 C, M or U courses in addition to those listed above

    or

    or

    Mature Applicants

    Diplomas and Certificates

    An applicant is considered a mature applicant if they have not completed secondary school or other postsecondary school, and will be 19 or older as of the first day of classes. Humber will invite you for testing to demonstrate that you meet program eligibility.

    Degrees

    An applicant is considered a mature applicant if they have not completed secondary school or attended postsecondary studies, and will be 21 or older as of the first day of classes. Mature applicants for degree programs will be required to meet course requirements at the U/M level or equivalent.

    College Transfer Applicants

    Diplomas and Certificates

    An applicant is considered a college transfer applicant if they have completed some or all of a college-level credential. Humber may use a combination of secondary school and/or college courses and grades to determine program eligibility.

    Degrees

    An applicant is considered a college transfer applicant if they have completed some or all of a college-level credential. Humber may use a combination of secondary school and/or college courses and grades to determine program eligibility. Applicants must have an overall minimum grade point average (GPA) of 65 per cent in the program. Applicants are required to disclose and provide academic transcripts for all course work completed at the postsecondary level.

    University Transfer Applicants

    Diplomas and Certificates

    An applicant is considered a university transfer applicant if they have completed some or all of a university-level credential. Humber may use a combination of secondary school and/or university courses and grades to determine program eligibility.

    Degrees

    An applicant is considered a university transfer applicant if they have completed some or all of a university-level credential. Humber may use a combination of secondary school and/or university courses and grades to determine program eligibility. Applicants are required to disclose and provide academic transcripts for all course work completed at the postsecondary level.

  • English Language Proficiency

    All applicants whose first language is not English must meet Humber’s English Language Proficiency Policy.

  • International Credit Evaluation

    Canadian citizens or permanent residents with international education are required to provide a WES or ICAS evaluation.

INTERNATIONAL ACADEMIC EQUIVALENCY

Admission equivalencies for Humber depend on your country of study. Please enter your location or choose detect my location to see the requirements for your country below.

Post-Admission Requirements

Once you have been accepted, and have confirmed your offer, you may need to complete a further set of requirements related to your program (Post-Admission Requirements).

Not available

Fees

The 2019-2020 fee for three semesters was:

  • domestic: $7,890.19
  • international: $22,908.00

Fees are subject to change.

Scholarships

Humber offers a variety of scholarships each year.

Learn more

Fees by Semester 

Fees by Semester

Semester 1 Domestic Fee International Fee*
Total $2,568.73 $7,496.00
Tuition $1,801.89 $6,729.16
Compulsory Ancillary Fee $469.89 $469.89
Enhanced Student Experience Fee (Optional) $55.95 $55.95
Program Ancillary Fee $241.00 $241.00
Co-op/Placement $0.00 $0.00

 

Semester 2 Domestic Fee International Fee*
Total $2,683.73 $7,496.00
Tuition $1,801.89 $6,614.16
Compulsory Ancillary Fee $469.89 $469.89
Enhanced Student Experience Fee (Optional) $55.95 $55.95
Program Ancillary Fee $356.00 $356.00
Co-op/Placement $0.00 $0.00

 

Semester 3 Domestic Fee International Fee*
Total $2,637.73 $7,496.00
Tuition $1,801.89 $6,660.16
Compulsory Ancillary Fee $469.89 $469.89
Enhanced Student Experience Fee (Optional) $55.95 $55.95
Program Ancillary Fee $310.00 $310.00
Co-op/Placement $0.00 $0.00

*Plus Mandatory Health Insurance fee once per academic year: Fall start - $420 Winter start - $280 Summer start - $140

Additional Costs

$250 - materials. Additional costs may include personal protection equipment (PPE) needed and utilized in the lab environment.

Pathways

Pathways are academic routes that students can take to move from one credential to another.

Contact Us

Program Specific Questions

Drew Aaslepp, program co-ordinator
416.675.6622 ext. 78059
drew.aaslepp@humber.ca

Current students please send inquiries to: SATadvising@humber.ca.

Admissions Questions

Domestic Students  

Phone: 416-675-5000
Email: enquiry@humber.ca

International Students  

Contact the International Centre

How to Apply

Applications to Humber are made through ontariocolleges.ca. Be sure to submit your application by the equal consideration deadline of February 1. You may apply after February 1, however, post-February 1 applications will be considered on a first-come, first-served basis depending on the availability of the space in the program. To check program availability refer to the Campus/Availability listing on Humber's program pages or ontariocolleges.ca.

Admissions Road Map

Apply through Ontario Colleges

INTERNATIONAL STUDENTS

If you’re an international student, you can apply directly to Humber via our International Centre.

Apply through the International Centre

close widget icon

Humber’s Cabinet Making certificate program, located at the Humber Centre for Trades & Technology, provides you with the knowledge and skills to construct and install basic cabinets, as well as build traditional furniture using recognized trade practices. By completing a series of woodworking projects, you will explore various types of joinery and construction techniques using hand tools, portable power tools, stationary machines, as well as computer-based technologies. Time management skills and the ability to work to a deadline are developed and stressed throughout the program.

Graduates of the program will be able to produce shop drawings, calculate a list of materials, cut out and assemble basic cabinetry or furniture and also apply a finish. Graduates are able to safely operate most common stationary woodworking machinery, as well as CNC machines, in a limited capacity.

Courses

The Humber Experience

Skilled Trades Honors Breakfast

skilled trades breakfast

Congratulations to all of the honors students who could make it to the annual "Skilled Trades Honors Breakfast"!

Students spend the majority of their time in our 10,000 square foot woodworking lab, located at The Humber Centre for Trades and Technology. Within the lab there is a large bright bench area for assembly and bench work. We also utilize a kitchen cabinet installation area. All common industrial woodworking machines are available for student use, as well as a vacuum pressing area for curved forms and veneering, a hydraulic veneer press, three computer numerical control (CNC) routers, a CNC lathe, and a CNC dovetailer. A dedicated electronic classroom is available for lectures.

Humber Also Offers

Industrial Woodworking Technician diploma program for those wishing to enhance their training with computer, communications and business courses.

AMWAC Manual Donation

AMWAC Manual Donation

Richelieu, Formica, and Upper Canada Forest Products have graciously donated 20 AWMAC (Architectural Woodwork Manufacturers Association of Canada) manuals to our students in the Industrial Woodworking Technology and Cabinet Making programs. This contribution will be greatly appreciated by our students!

Your Career

Employer interest in our graduates has grown steadily throughout the program’s history. We offer a comprehensive program that provides a solid grounding in woodworking and prepares a student for employment in a wide range of areas including store fixtures, architectural millwork (doors and windows), the kitchen cabinet industry, as well as furniture construction.

Program Availability

START DATE LOCATION STATUS INTERNATIONAL STATUS
January 2020 North Open Open
September 2020 North Open Open
January 2021 North Open Open

Cabinet Making Showcase

student working on equipment for woodworking

Watch the video to see third semester cabinet making students showcase their end of year capstone project to friends, faculty, and members of the industry.


Humber

Centre for Skilled Trades and Technology

Centre for Skilled Trades and Technology

Wed, July 24, 2019

The Centre for Trades and Technology was one of the clusters involved in the Skills Ontario Competition which took place May 6th - 8th.

Read the Full Article
New Fall 2019: Programs with Optional Co-op

New Fall 2019: Programs with Optional Co-op

Thu, July 11, 2019

As part of FAST’s commitment to work-integrated learning and the development of career-ready graduates. 

We are pleased to announce the addition of Optional Co-op streams in the following programs:

  • Building Construction Technician
  • Computer and Network Support Technician
  • Computer Engineering Technology
  • Construction Engineering Technology
  • Electrical Engineering Technology – Control Systems
  • Electromechanical Engineering Technology
  • Electronics Engineering Technology
  • Mechanical Engineering Technology
  • Sustainable Energy and Building Technology

Starting with the Fall 2019 intake, students will have the option to participate in co-op at various points in their academic program. The co-op work terms will alternate between periods of academic study and are sequenced to best address the needs of industry and demand. Information about the co-op option will be available on program webpages and the Work Placement Services website.

There are numerous opportunities for Program Coordinators and Faculty to collaborate with the Work Placement Services Office to help launch this important initiative! More to come in the fall.

Read More
Humber winners at Skills Ontario Competition 2019

Humber winners at Skills Ontario Competition 2019

Thu, May 23, 2019

Congratulations to all competitors and winners for making Humber proud. We can't wait to see what the future holds for all of you!

The Skills Ontario Competition is Canada's largest skilled trade and technology competition, which offers a unique opportunity for top students to demonstrate their talents and skills. Over two and a half days, they capture the attention of their educators, family, friends and prospective employers. Winners are awarded with Gold, Silver or Bronze medals, including monetary awards and the opportunity to compete in the Skills Canada National Competition after which they have a chance to move on to World Skills Competition.

Numerous Humber students, from different fields, gave their best in the competitions, and brought home medals.

Congratulations to all competitors and winners for making Humber proud. We can't wait to see what the future holds for all of you!

Automation & Controls
Everest Bezati - Bronze

Electronics
Brendan Woo - Gold
Nicholas Roos - Silver

Heating Systems
Wylie Gallant - Bronze

Horticulture & Landscape Design Team of Two
Patrick Misko & Taylor Schottroff - Bronze

Landscape Design
Thales Leonardo DaSilva - Gold
Raymond Ho - Silver

Mechanical CADD
Keiran O'Neil - Bronze

Mechatronics Team of Two
Hartej Tapia & Marko Gunja - Gold
Sunhail Mohammed & Alex Mosor - Silver

Read More

No news at this time.

Faculty of Applied Sciences & Technology Events

Last Day of Classes

Last Day of Classes

Humber

Fri, December 13, 2019
All Campuses

Faculty of Applied Sciences & Technology News

Student Work Showcases

Student Work Showcases

Wed, August 21, 2019

The Industrial Design Thesis Project is a 2-semester final year project which is the Capstone project for all Industrial Design degree aspirants.

Dean's Message

Dean's Message

Thu, July 25, 2019

As the 2018-19 academic year comes to an end, I am proud to look back on the incredible achievements of our students, faculty and support staff.
Read the Full Article
Celebrating a FAST Spring Convocation

Celebrating a FAST Spring Convocation

Wed, July 24, 2019

Dear Colleagues,
“Be Bold, be brave, be amazing”.

 

Read the Full Article

No news at this time.

Every attempt is made to ensure that information contained on this website is current and accurate. Humber reserves the right to correct any error or omission, modify or cancel any course, program, fee, timetable or campus location at any time without prior notice or liability to users or any other Person.

On June 29, 2018, the Provincial Government of Ontario announced the renaming of the Ministry of Advanced Education and Skills Development (MAESD) to the Ministry of Training, Colleges and Universities (MTCU). Both names may appear on this website.